|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P1 Portable Antenna Tri-pod NMO
|
P1 Portable Antenna Tri-pod NMO Antenna Mount
It is not the correct Tri-Pod for the P1 Antenna System!
It will work with any antenna that has standard NMO
This is a great Field Day or ARES setup it will allow you to utilize any of your existing antennas with standard NMO threads in a portable setup!
It will allow you to use your existing Mobile Antenna for Portable or Emergency Communications.
Some antennas may be used as a ground plane and mounted on a pole.
Any antenna with NMO Mount Shown with
It may be setup on table, roof top, or on the ground!
It has 24 inch - 3 Position legs for very stable setup!
1/4 inch Male Spade Connection For Counterpoise.
Closed Length 12 inches
GREAT AS EMERGENCY ANTENNA NOW YOU HAVE NO REASON TO GO OFF THE AIR DURING A STORM.
Just remove your existing mobile antenna from car or truck bring in the house and setup.
MAKES A GREAT ADDITION TO YOUR READY OR GO KIT!
Antennas & Radios Pictured are not included and are available from there manufactures.
All Aluminum Construction with Delrin Leg clamps.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
|
Dual Band Yagi 2 Meter - 70 cm
|
|
|
Dual Band Yagi 2 Meter - 70 cm
4 Element for 2 Meters - 144 to 148 Mhz.
7 Elements for 440 70 cm - 430-450 Mhz
8.3 dBd Front /Back 29dB on 2 Meters
10.8 dBd Front /Back 30dB on 70 cm
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom is machined from 6061 T-6 Square Aluminum Tube.
- Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
- Clamps to masts up to 1 1/2" in diameter.
- Boom Length 48 inches
- Sperate feeds for each band
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
Satelite Dual Band Yagi 2 Meter - 70 cm
|
|
|
Satelite Dual Band Yagi 2 Meter - 70 cm
Elements are cross polorized
4 Element for 2 Meters - 144 to 148 Mhz.
7 Elements for 440 70 cm - 430-450 Mhz
8.31 dBd Front /Back 27dB on 2 Meters
10.6 dBd Front /Back 30dB on 70 cm
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom is machined from 6061 T-6 Square Aluminum Tube.
- Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
- Clamps to masts or boom up to 1 1/2" in diameter.
- Separate Feeds for each band
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
6 Meter Yagi Beam Antenna 4 Elements
|
|
|
|
|
6 Meter Yagi Beam 3 Elements
|
|
|
|
|
6 Meter Yagi Beam Antenna 5 Elements
|
6 Meter Yagi Beam Antenna 5 Elements
Covers 6 Meter Ham Band.
Maximum Gain 12 dBd Front / Back 23dB
SWR > 1.5:1
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Horizontally Polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, Weatherproof Construction:
- Boom is machined from 6061 T-6 Structural Square Aluminum Tube (Round Corners for reduced wind resistance).
- Elements are machined from 3/8" Solid aluminum round stock and attached to the boom with stainless steel hardware.
- Clamps to masts up to 1 1/2" in diameter.
- Adjust for any frequency from 50 MHz. to 54 MHz.
- Mounts Horizontal
- Elements grounded for lighting protection
- Approx. Turning Radius 96 inches
- Boom Length 152 inches
- Power Legal Limit
- Approx. Wind Surface 2.6 SQ Feet
Antenna is optimized for number of elements and size.
Use for 50-54 Mhz, Ham radio, or Packet Radio.
These are made to order, please allow 10 busisness days for shipping.
These antennas are 74 inches boom sections, and require extra shipping.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
Red Cross Frequency 47 MHz 2 Elements Yagi Antenna
|
|
|
|
|
Red Cross Frequency 47 MHz 4 Elements Yagi Antenna
|
|
|
|
|
25 Ft Coax RG 58A/U win PL-259 Molded ends |
|
|
|
|
|
P1 Portable Antenna Ground Mounting Stake
|
|
|
|
|
|
P1 Portable Antenna System Base Rods
|
|
|
|
|
|
P1 Portable Antenna System Telescopic Whip
|
|
|
|
|
|
|
|
|
P1 Portable Antenna Tri-pod NMO
|
P1 Portable Antenna Tri-pod NMO Antenna Mount
It is not the correct Tri-Pod for the P1 Antenna System!
It will work with any antenna that has standard NMO
This is a great Field Day or ARES setup it will allow you to utilize any of your existing antennas with standard NMO threads in a portable setup!
It will allow you to use your existing Mobile Antenna for Portable or Emergency Communications.
Some antennas may be used as a ground plane and mounted on a pole.
Any antenna with NMO Mount Shown with
It may be setup on table, roof top, or on the ground!
It has 24 inch - 3 Position legs for very stable setup!
1/4 inch Male Spade Connection For Counterpoise.
Closed Length 12 inches
GREAT AS EMERGENCY ANTENNA NOW YOU HAVE NO REASON TO GO OFF THE AIR DURING A STORM.
Just remove your existing mobile antenna from car or truck bring in the house and setup.
MAKES A GREAT ADDITION TO YOUR READY OR GO KIT!
Antennas & Radios Pictured are not included and are available from there manufactures.
All Aluminum Construction with Delrin Leg clamps.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
|
|
P1 Portable Antenna Universal Mounting Base
|
|
|
|
|
|
P1 Portable Multi Band Vertical Antenna System QRP to 150 Watts
P1 Portable HF 7 - 500 Mhz Antenna QRP to 150 Watts
Ham Bands & Beyond.
7 Mhz to 500 Mhz - Covers 3Mhz - 6 Mhz 60 and 80 Meters w/Optional Coil.
If your space is limited them this antenna system is for you.
A reliable emergency and backup antenna system.
Constructed from high quality components.
A Versatile antenna system!
Perfect for the traveler!
Weighs in at just 1 LB 8 oz.
Total Height: 74 inches
But provides lots of radiating power
Provides gain 0.3dBd. or 2.45dBi
Easily sets up in minutes!
Easily tuned, NO TUNER REQUIRED!
Great for the ARES Operator, Field Day,
RV or Camper, Motel or Condo Owner!
SAR, Search and Rescue
Covers Public Service Frequencys.
Shelter Operations
Deed Restricted? This is your ultimate System!
Covers 60 and 80 Meters With Optional Coil Required
It will mount to almost any object!
Limited only by your imagination!
Tables
Deck Railings
Motel or Condo Railings,
Fences, Wood, Chain link
Camera Tripods
BBQ Grills
Many other locations!
Included Items!
This sale consists of the P1 Coil, 2 - Base rods, telescopic whip, "C" Clamp, Mounting Clamp, 50 Ft wire for Counterpoise
Proudly Made in the USA
By Hams for Hams
New Manual Rev3 26 June 2010
|
|
|
|
|
|
|
P1 Portable Antenna System 60-80 Meter Coil
|
|
|
|
|
|
Catagory 5 Ultra Heavy Duty 2 Meter 4 Element
|
|
|
Category 5 Ultra Heavy Duty 2 Meter 4 Element
Built to with stand winds up to 175 MPH
Will stand up to Very Heavy Frozen Precipitation
4 Element for 2 Meters - 144 to 148 Mhz.
8.31 dBd Front /Back 20dB on 2 Meters
Boom Length 48 inches
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom 1 inch Structural 6061 T-6511 Structural (Round Corners) Square Aluminum Tube.
- Elements are 3/8" solid 6061 T6511 Aluminum
- Clamps to masts or boom up to 1 1/2" in diameter.
- Wind Surface Aprox 60 Square inches
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
Category 5 Ultra Heavy Duty 70cm 4 Element
|
|
|
|
|
220 Band 1.25 CM 3 Element Yagi Antenna
|
|
|
|
|
220 Band 1.25 CM 4 Element Yagi Antenna
|
|
|
|
|
4 Element 2 Meter Yagi Beam Antenna.
4 Element 2 Meter Yagi Antenna.
Covers VHF Two Meter 144 to 148 Mhz.
Easy to set up and use. Delivers outstanding results.
Computer designed, SWR tuneable.
Can be horizontally or vertically polarized,
Uses standard 50 ohm coax with PL-259 terminals.
Heavy Duty, weatherproof construction:
Boom is machined from 6061 T-6 Aluminum Tube Length is 48 inches.
Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
Clamps to masts up to 1 1/2" in diameter.
Use for 144 - 148 Mhz, 2m SSB, 2 Meter Ham radio, or Packet Radio. 300 Watts .
Made in the USA! |
|
|
|
|
|
5 Element 2 Meter Yagi Beam Antenna
|
|
|
|
|
Catagory 5 Ultra Heavy Duty 2 Meter 4 Element
|
|
|
Category 5 Ultra Heavy Duty 2 Meter 4 Element
Built to with stand winds up to 175 MPH
Will stand up to Very Heavy Frozen Precipitation
4 Element for 2 Meters - 144 to 148 Mhz.
8.31 dBd Front /Back 20dB on 2 Meters
Boom Length 48 inches
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom 1 inch Structural 6061 T-6511 Structural (Round Corners) Square Aluminum Tube.
- Elements are 3/8" solid 6061 T6511 Aluminum
- Clamps to masts or boom up to 1 1/2" in diameter.
- Wind Surface Aprox 60 Square inches
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
|
|
|
|
70 CM-4EL 4 Element Yagi Beam Antenna
|
|
|
|
|
70 CM-5EL 5 Element Yagi Beam Antenna
|
|
|
|
|
7 Element Yagi Antenna for 70 cm 440 Band
Covers VHF 70 cm 440 Mhz Band.
10.8 dBd Front /Back 30dB
Easy to set up and use. Delivers outstanding results.
Computer designed, SWR tuneable.
Can be horizontally or vertically polarized,
Uses standard 50 ohm coax with PL-259 terminals.
Heavy Duty, weatherproof construction:
Boom is machined from 6061 T-6 Square Aluminum Tube Length is 44 inches.
Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
Clamps to masts up to 1 1/2" in diameter.
Boom is cross drilled for and extra set of elements, This allows Horizontal/Vertical polarization or circular with phasing harness, (not included).
Antenna is optimized for number of elements and size.
This auction includes:
7 Element Yagi Antenna with all hardware & Mast Clamp Assembly, Installation instructions
Extra set of 7 elements and gamma match sold separately!
Made in the USA
Blue Star Antennas |
|
|
|
|
|
Category 5 Ultra Heavy Duty 70cm 4 Element
|
|
|
|
|
Extra Set of 7 Elements.
Allows Horizontal and Vertical Polarization
on the same boom.
Also allows for circular polarization
with phasing harness.
Complete set of 7 elements Gamma Match Feed and mount. |
|
|
|
|
|
Dual Band Yagi 2 Meter - 70 cm
|
|
|
Dual Band Yagi 2 Meter - 70 cm
4 Element for 2 Meters - 144 to 148 Mhz.
7 Elements for 440 70 cm - 430-450 Mhz
8.3 dBd Front /Back 29dB on 2 Meters
10.8 dBd Front /Back 30dB on 70 cm
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom is machined from 6061 T-6 Square Aluminum Tube.
- Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
- Clamps to masts up to 1 1/2" in diameter.
- Boom Length 48 inches
- Sperate feeds for each band
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
Satelite Dual Band Yagi 2 Meter - 70 cm
|
|
|
Satelite Dual Band Yagi 2 Meter - 70 cm
Elements are cross polorized
4 Element for 2 Meters - 144 to 148 Mhz.
7 Elements for 440 70 cm - 430-450 Mhz
8.31 dBd Front /Back 27dB on 2 Meters
10.6 dBd Front /Back 30dB on 70 cm
- Easy to set up and use. Delivers outstanding results.
- Computer designed, SWR tuneable.
- Can be horizontally or vertically polarized,
- Uses standard 50 ohm coax with PL-259 terminals.
- Heavy Duty, weatherproof construction:
- Boom is machined from 6061 T-6 Square Aluminum Tube.
- Elements are machined from 1/4" aluminum round stock and attached to the boom with stainless steel hardware.
- Clamps to masts or boom up to 1 1/2" in diameter.
- Separate Feeds for each band
- Power 300 watts
Antenna is optimized for number of elements and size.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
70 CM-4EL 4 Element Yagi Beam Antenna
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Butter-Fly Capacitance Hat
A capacitance hat for Any Screw Driver Mobile Antenna, installs above the loading coil with either a 3/8-24 stainless steel stud or an extension rod.
Use the Capacitance Hat and get a big improvement in performance on the lower bands. The base of the Capacitance Hat is 12" tall with standard 3/8 x 24 thread at both ends. It uses 4 stainless steel rods formed into a butterfly pattern 90 degrees to the antenna for maximum capacitance with less weight.
The Capacitance Hat is designed to help in two ways. First, you can use the Capacitance Hat with a whip as short as 30" and get the same frequency coverage as the 6' whip without sacrificing performance.
Second, you can add the 6' whip to the top of the Hat.
Capacitance Hat comes with a stainless steel 3/8-24 stud and 3/8-24 threaded hole for the whip. It has four "lobes" No dangerous rods sticking out! Constructed of Machined Solid Aluminum hub, four .100 dia. 304 SS lobes.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
P1 Portable Antenna Tri-pod NMO
|
P1 Portable Antenna Tri-pod NMO Antenna Mount
It is not the correct Tri-Pod for the P1 Antenna System!
It will work with any antenna that has standard NMO
This is a great Field Day or ARES setup it will allow you to utilize any of your existing antennas with standard NMO threads in a portable setup!
It will allow you to use your existing Mobile Antenna for Portable or Emergency Communications.
Some antennas may be used as a ground plane and mounted on a pole.
Any antenna with NMO Mount Shown with
It may be setup on table, roof top, or on the ground!
It has 24 inch - 3 Position legs for very stable setup!
1/4 inch Male Spade Connection For Counterpoise.
Closed Length 12 inches
GREAT AS EMERGENCY ANTENNA NOW YOU HAVE NO REASON TO GO OFF THE AIR DURING A STORM.
Just remove your existing mobile antenna from car or truck bring in the house and setup.
MAKES A GREAT ADDITION TO YOUR READY OR GO KIT!
Antennas & Radios Pictured are not included and are available from there manufactures.
All Aluminum Construction with Delrin Leg clamps.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
|
|
Tower Mast Side Clamp
Allows for the addition of side arm or side mounting of antenna on any tower or mast with legs up to 1 ½ inches diameter.
Structural 6061 T 6511 Aluminum with 18- Stainless Steel Hardware
Specs:
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
|
|
|
220 Band 1.25 CM 3 Element Yagi Antenna
|
|
|
|
|
220 Band 1.25 CM 4 Element Yagi Antenna
|
|
|
|
|
70 CM-5EL 5 Element Yagi Beam Antenna
|
|
|
|
|
6 Meter Yagi Beam Antenna 4 Elements
|
|
|
|
|
Butter-Fly Capacitance Hat
A capacitance hat for Any Screw Driver Mobile Antenna, installs above the loading coil with either a 3/8-24 stainless steel stud or an extension rod.
Use the Capacitance Hat and get a big improvement in performance on the lower bands. The base of the Capacitance Hat is 12" tall with standard 3/8 x 24 thread at both ends. It uses 4 stainless steel rods formed into a butterfly pattern 90 degrees to the antenna for maximum capacitance with less weight.
The Capacitance Hat is designed to help in two ways. First, you can use the Capacitance Hat with a whip as short as 30" and get the same frequency coverage as the 6' whip without sacrificing performance.
Second, you can add the 6' whip to the top of the Hat.
Capacitance Hat comes with a stainless steel 3/8-24 stud and 3/8-24 threaded hole for the whip. It has four "lobes" No dangerous rods sticking out! Constructed of Machined Solid Aluminum hub, four .100 dia. 304 SS lobes.
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
Guying Kit
Guying system includes black nylon braided cord 3 ground stakes, and 3 line tighteners (no need for fancy knots!). |
|
|
|
|
|
Telescoping Antenna Stand
The Ultimate P1 Di-pole Tripod / Mast System
We looked long and hard for the ultimate tripod that was strong enough to handle
all types of conditions.
We manufacture these tripods in the USA out of black powder coated tubular steel and they are as rugged as they are good looking.
The legs extend to a full height of 45inches.
This tripod is designed to accommodate our 16 ft collapsible mast. The mast fits snugly through the center columns and can be locked into place by hand with a wing-nut screw.
45" Maximum Tripod Height
35mm / 1.375" diameter tube with 132 lbs. load capacity
Maximum Mast length 16 ft
Over all height Mast & Tripod 19 ft
Model No.: DPTRI-1
Shipping Weight (in pounds): 15
Assembled in Country of Origin: USA
Origin of Components: USA
This Tripod / Mast System is suitable for Commercial / Portable Ops. as a mini tower system. Highly suitable for ARES / MARS, Search & Rescue. With optional Tri-antenna head it allows for 3 antennas and weather station to be top mounted.
PLEASE NOTE: It is recomended that this mast needs to be guyed at all times. Our guying system includes nylon braided cord 3 ground stakes, and 3 line tighteners (no need for fancy knots!).
Guying system not Included with tripod system.
|
|
|
|
|
|
Tri-antenna head it allows for 3 antennas and weather station to be top mounted, on Blue Star Antennas, Mini Tower Portable Mast & Antenna Stand Tripod. System must be guyed when in use.
It breaks down for easy storage
- Arm Length 28 inches
- Arm tip to arm tip 50 inches
- Mounting plate accepts Blue Star Antennas yagi's and J-pole mounts.
- It incorporates built in guy ring.
- Mount allows for 3 VHF/UHF antennas
- Space for weather station
- Weight is 6 lbs
- 7-10 Day Lead Time Before Shipping
ANTENNAS AND WEATHER STATION, TRIPOD, MAST, GUYING NOT INCLUDE AND AVAILABLE SEPARATE
Antennas and weather station not included.
|
|
|
|
|
|
|
Tower Mast Side Clamp
Allows for the addition of side arm or side mounting of antenna on any tower or mast with legs up to 1 ½ inches diameter.
Structural 6061 T 6511 Aluminum with 18- Stainless Steel Hardware
Specs:
Made in the USA
Blue Star Antennas
|
|
|
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | |
